The Happymodel Mobula6 2024 version may simply be one of the best BNF Tiny Whoop this 12 months. As somebody who has examined many micros, together with earlier variations of the Mobula, I used to be wanting to see how this one stacked up, particularly by way of flight efficiency and sturdiness.
For those who’re new to Tiny Whoops, take a look at our purchaser’s information for helpful equipment, spare elements, and suggestions: https://oscarliang.com/best-tiny-whoop/
The place to Purchase?
Get the Mobula6 2024 Version from these distributors:
Specs
Body
- Dimension: 81mm x 81mm x 37mm
- Model Title: Happymodel
- Wheelbase: 65mm
Flight Controller
- Constructed-in present meter sensor: Present meter scale 1175
- Constructed-in voltage meter sensor: Voltage meter scale 110
- Energy provide: 1-2S battery enter (DC 2.9V-4.35V)
- MCU: STM32F411CEU6 (100MHz, 512K FLASH)
- Constructed-in 5A (every): Blheli_S 4in1 ESC
- Mount gap measurement: 25.5mm x 25.5mm
- Constructed-in UART ExpressLRS: V3.0.0
Onboard 4-in-1 ESC
- Present: 12A steady, peak 6A (3 seconds)
- Manufacturing unit firmware: Bluejay ESC V0.19.2
- Help: BLHeli_S Programmable
- Energy provide: 1-2S LiPo/LiPo HV
- Default protocol: DSHOT300
Motors
- Motor Dimensions (Dia. x Len): 9.5mm x 14mm
- Mannequin: SE0702 KV28000
- Stator Diameter: 7mm
- Configuration: 9N12P
- Shaft Diameter: 1mm
- No. of Cells (Lipo): 1S
- Stator Size: 2mm
- Weight: 1.46g
Design and Sturdiness
The Mobula6 2024 is extremely light-weight, tipping the scales at simply over 17.8 grams. In comparison with the unique Mobula6, which weighed 20.2 grams, it’s over 10% lighter. This weight discount is principally because of a brand new light-weight body design, although it’d increase considerations about sturdiness.
Personally, I like the concept of utilizing a extra stripped-down cover—that is precisely what the hardcore Tiny Whoop group has needed for a very long time.
I anticipated the sturdiness of the 2024 Version to be worse in comparison with the unique model because of the minimal plastic used within the cover defending the digicam. Nevertheless, it held up remarkably properly after quite a few crashes throughout my take a look at flights. This resilience is probably going because of its general light-weight design.
Nevertheless, there are weak stress factors across the base of the digicam mount. After just a few days of flying and crashing, the digicam mount grew to become a little bit deformed, inflicting the digicam to tilt barely to 1 facet. Whereas nonetheless flyable, this concern is noticeable when flying and barely annoying, however fortuitously, it comes with a spare cover within the field.
Regardless of this, the general construct high quality and development are strong, with a well-thought-out element format that makes upkeep and repairs simple.
Element Upgrades
The Mobula6 2024 Version options some notable upgrades in its electronics and digicam. The brand new SuperX 5in1 AIO FC board is streamlined and seems well-suited for future body designs because of its compact measurement. It has a built-in ExpressLRS receiver with a copper wire antenna, which I discovered provides higher vary and sturdiness in comparison with ceramic antennas.
The digicam is one other spotlight, providing a wider discipline of view than the earlier Nano 3 digicam. Whereas the Nano 3 offered clear photos, its slender discipline of view was limiting. The brand new digicam’s wider FOV is a welcome enchancment, enhancing the flying expertise by offering a greater sense of the drone’s environment.
Flight Efficiency
The Mobula6 2024 Version stunned me with its agility and responsiveness proper out of the field. It handles superbly, even when navigating tight areas and near obstacles. Though the inventory PID and filter tune appeared to require additional tweaking to scale back prop wash and vibration, the general flight efficiency was strong.
One of many greatest promoting factors of the Mobula6 is its versatility. Its compact measurement and quiet operation make it excellent for indoor flying, but it surely’s additionally succesful outside in calm circumstances. You don’t want a big house to get pleasure from flying this drone.
Closing Ideas
The Mobula6 2024 Version from Happymodel units a excessive bar for what a Tiny Whoop will be. Its strong construct, light-weight development, enhanced digicam, and improved electronics make it a standout mannequin that needs to be on each micro drone fanatic’s radar.
Get the Mobula6 2024 Version from these distributors:
Nevertheless, the weak cover and digicam vulnerability are considerations potential consumers ought to pay attention to. The PID tune additionally has room for enchancment.
For anybody from newcomers to skilled pilots seeking to dive into or improve their tiny whoop assortment, the Mobula 6 2024 version provides a compelling mix of efficiency and enjoyable. Whereas it has some flaws, its strengths make it a worthwhile consideration for anybody captivated with drone flying.