The DJI Air 3 is at present lower than a yr outdated with many new to flying drones, fans, content material creators, and veterans having fun with often flying and producing content material with it.
Nevertheless, though comparatively younger, the Air 3 may encounter a hiccup or two or could also be gifted or bought to another person this season.
With this in thoughts, can the Air 3 and its accompanying distant controllers be manufacturing unit reset?
Sadly, the DJI Air 3 can’t be manufacturing unit reset. Nevertheless, I’ll talk about rolling again the Air 3 and DJI RC 2’s firmware, when accessible, with the DJI Assistant 2 software program. Moreover, I’ll go over the steps wanted to arrange the Air 3 for gifting or promoting: which incorporates unbinding gadgets and deleting profiles.
Allow us to take a deeper have a look at these steps.
DJI Assistant 2 (Client Drone Sequence)
The DJI Assistant 2 (Client Drone Sequence) software program was created by DJI to be used with lots of its client drones to carry out numerous duties.
The duty we’re involved with for this text could be rolling again firmware updates, if and when accessible.
For earlier fashions of DJI drones utilizing the Assistant 2 software program, there have been certainly choices for bringing a drone again to beforehand launched firmware variations.
As of this text’s writing, there have been no earlier Air 3 firmware variations which are accessible to roll again to. Nevertheless, within the close to future, when and if this feature turns into accessible, the steps are coated right here.
» MORE: Does DJI Assistant Work with Air 3 (Answered – With Video)
Downloading & Putting in DJI Assistant 2
To obtain the DJI Assistant 2 software program for the Air 3, choose one of many two following hyperlinks to your pc kind:
After you’ve downloaded the software program, set up it utilizing the strategies of set up to your pc kind.
» MORE: DJI Assistant 2: A Full Information (Step-by-Step)
Air 3 Firmware Downgrade (If Accessible)
To attach the Air 3 to your PC or Mac for firmware downgrading, you will have the USB to USB-C cable that got here included with the Air 3.
As a aspect notice, the DJI-included USB-C cable each fees the Air 3 and acts as an information cable. The information side of the cable is what connects the Air 3 to the DJI Assistant 2 software program.
Not all third celebration USB-C cables are information cables. So, it’s good to see that DJI has included this explicit cable with all their Air 3 combos and packages.
To attach the Air 3:
Step 1: Insert the Air 3’s USB to USB-C cable into an empty USB slot in your pc.
Step 2: Whereas the Air 3 is off, plug the USB-C finish into the Air 3.
Step 3: With the Air 3 plugged into an empty USB slot in your PC or Mac, launch the DJI Assistant 2 software program.
Step 4: For first-time utilization of the DJI Assitant 2 Software program, you will have to be logged into your DJI account, which might be carried out within the right-hand nook of the Assistant 2 display.
Step 5: After logging into your DJI account or confirming it’s logged in, unfold the Air 3’s legs and arms.
Take away the gimbal cowl and activate the Air 3 by urgent the facility button as soon as after which holding the facility button.
Step 6: The DJI Assistant 2 software program will then launch a display that shows an icon representing the Air 3. Select the Air 3.
Step 7: On the left aspect of the display select Firmware Replace. You’ll see an inventory of Firmware Variations. If there can be found Firmware variations to downgrade to, you will notice this beneath the Motion area to the appropriate.
» MORE: How you can Use DJI Assistant 2 with DJI Mini 3 / Mini 3 Professional (Step-by-Step Information)
Distant Controller Firmware Downgrade (If Accessible)
If you’re wanting to make use of the DJI Assistant 2 software program together with your DJI RC 2 or RC-N2:
Step 1: Insert the Air 3’s USB to USB-C cable into an empty USB slot in your pc.
Step 2: Whereas the RC 2 or RC-N2 is off, plug the USB-C finish into both the RC 2 or RC-N2. Activate the distant controller.
Step 3: With the RC 2 or RC-N2 plugged into an empty USB slot in your PC or Mac, launch the DJI Assistant 2 software program.
Step 4: The DJI Assistant 2 software program will then transition to a display that reveals both your RC 2 or RC-N2. Select your distant controller.
Step 5: On the left aspect of the display select Firmware Replace. You’ll see an inventory of Firmware Variations. If there can be found Firmware variations to downgrade to, you will notice this beneath the Motion area to the appropriate.
» MORE: How you can Downgrade Your DJI Firmware Utilizing DJI Assistant 2 (Defined)
DJI RC 2 Manufacturing unit Reset
Not like the Air 3 and the RC-N2, the DJI RC 2 can be manufacturing unit reset. As a result of the RC 2 is mainly an Android good gadget, it’s fairly straightforward to reset the distant controller.
Notice: Manufacturing unit resetting the DJI RC 2 doesn’t roll again the present firmware. It removes all saved consumer info and information from the distant controller.
To manufacturing unit reset the DJI RC 2, comply with these steps:
STEP 1: After powering on the RC 2, contact the highest of the display and slide down twice. This may convey you to the notifications display.
STEP 2: Faucet the settings icon on the highest right-hand nook of the display.
This may open the settings display.
STEP 3: Faucet the System choice on the backside of the display.
STEP 4: Faucet Reset Choices
STEP 5: Press Erase all information (manufacturing unit reset)
STEP 6: You’ll then be introduced with a list of what’s going to be erased from the distant controller. Select Erase all information.
After these steps have been accomplished, the DJI RC 2 might be “again to new situation”, from a software program standpoint.
» MORE: How you can Fly DJI Air 3 Drone (With DJI RC 2)
Planning on Promoting or Gifting your Air 3 and DJI RC 2?
Though the Air 3 is a comparatively new drone, there could also be these wishing to provide/reward it to relations, or even perhaps promote their Air 3 on-line.
When doing so, along with wiping the info from the DJI RC 2, the Air 3 and RC 2 ought to likewise be unbound from the DJI account and the DJI Profile faraway from the RC 2 distant controller.
» MORE: What to do Earlier than Promoting Your Drone? Learn This First!
Unbinding Units
To unbind the Air 3 and DJI RC 2:
Step 1: Activate the Air 3 and DJI RC 2. Go to your Profile.
Step 2: Within the DJI Profile, faucet System Administration.
Step 3: Select the DJI Air 3 (you probably have a number of drones).
Step 4: Choose Take away System from Account and the Air 3 and DJI RC 2 might be eliminated out of your DJI Account.
» MORE: When Ought to You Improve Your Drone? (Learn This First)
DJI Profiles
The final step of the method could be to take away any traces of your DJI profile from the DJI RC 2.
To take away your present DJI Account info from the DJI RC 2:
STEP 1: Boot up the DJI RC 2. As soon as within the DJI Fly app, go to the Profile icon on the backside of the display.
STEP 2: When on the Profile display, scroll down on the right-hand aspect till you see the Settings tab. Go into Settings.
STEP 3: Select Log Out on the left aspect of the display.
STEP 4: Affirm you want to Log Out of your DJI account. You are actually carried out.
This may promptly take away your private info and flight information from the DJI RC 2. The data won’t be deleted out of your precise profile, as this info is related to the consumer account and never the Air 3.
» MORE: The place Is the Serial Quantity on DJI Air 3 (Answered)