8.9 C
London
Wednesday, February 21, 2024

THEBRICK Is YARH.IO’s Latest Cyberdeck Design



We’ve been masking cyberdeck tasks for a very long time now they usually are inclined to get “samey.” However YARH.IO (But One other Raspberry Handheld) has a historical past of releasing attention-grabbing designs that all the time impress us. The most recent venture from YARH.IO, THEBRICK, isn’t any totally different.

We’ve featured two YARH.IO builds previously: the unique YARH.IO MKI and the follow-up YARH.IO Micro 2. Each had been pocket computer systems constructed across the Raspberry Pi 3 Mannequin B+ with full tactile keyboards. However there was one YARH.IO venture we missed: the Cyberdeck Keyboard. That may be a 4×12 or 5×12 compact ortholinear mechanical keyboard designed to be used in cyberdecks. THEBRICK is YARH.IO’s first cyberdeck design to make the most of that keyboard.

THEBRICK options the Cyberdeck Keyboard and a Raspberry Pi 4 Mannequin B single-board laptop. THEBRICK has three major sections: the primary unit (THEBRICK itself), the Cyberdeck Keyboard, and a provider body that ties these two collectively. That is attention-grabbing, as a result of it helps many various carriers. As an example, one provider has folding hinge mechanisms so it will possibly elevate the primary unit as much as a degree that’s simpler to see. One other provider has a static design that appears a bit like an previous TRS-80 Mannequin 100 laptop, with the display screen flat above the keyboard.

This uncommon design pressured YARH.IO to cram every part aside from the keyboard into the primary unit. That comprises the Raspberry Pi, a 400×1280 pixel 7.9” touchscreen from Waveshare, three 5000mAh Fenix ARB-L21-5000U batteries (every with an built-in charger), a small OLED standing display screen, a Pimoroni Tiny 2040 improvement board to regulate that display screen, and extra. There may be even a heatsink and fan to maintain the Raspberry Pi good and funky. That’s lots to suit into such a small house, however YARH.IO even supplied wire guides to help in cable administration and hold every part tidy.

The primary unit enclosure, keyboard enclosure, and carriers are all 3D-printable. Like YARH.IO’s different designs, they’ve a type of minimalist industrial aesthetic that reminds us of merchandise from the Eighties. And, in fact, these STL information can be found for obtain so you may print them and construct your personal THEBRICK.

Latest news
Related news

LEAVE A REPLY

Please enter your comment!
Please enter your name here