9.1 C
London
Tuesday, April 2, 2024

Conexio BLITZ Combines Twin-Band Wi-Fi 6 and Bluetooth 5.4 Right into a Tiny Prototyping Platform



Conexio Applied sciences has launched a Crowd Provide pre-campaign for a Feather-compatible growth board. The Conexio BLITZ combines dual-band Wi-Fi 6, Bluetooth, and different 2.4 GHz protocols right into a compact growth board.

On the highest of the board, BLITZ has an SoC, J-Hyperlink programming header, energy swap, and a number of other connectors. USB-C gives knowledge and energy to the board. You’ll be able to join a LiPo battery to the two-pin header. A QWIIC connector lets you increase BLITZ with a big selection of sensors and different IoT-related peripherals. Customers can work together with BLITZ through a programmable push button and an LED.

The reverse facet of BLITZ has pads for surface-mount header pins. The 28 pins are suitable with Feather connections. (Nevertheless, the board seems barely bigger than a typical Feather.) Of the 28 pins, 22 can be found for software use.

Conexio says the BLITZ accommodates a Nordic nPM1300 Energy Administration IC. This PMIC gives step-down voltages from USB and a LiPo charging supervisor. Visible inspection of the (presently pictured) BLITZ exhibits no signal of the QFN32 or WLCSP IC. Nevertheless, the massive module with a steel defend is clearly discernible.

A MinewSemi MS12SF1 module accommodates a Nordic nRF53840 SoC and nRF7002 radio. The nRF53840 has a dual-core Arm Cortex-M33 microcontroller and a 2.4 GHz radio. This radio helps proprietary protocols and requirements like ANT, ZigBee, and Bluetooth. The module has a PCB antenna for Bluetooth and a uFL connector for an exterior dual-band Wi-Fi antenna.

Along with the opposite 2.4 GHz protocols, BLITZ helps Matter. Because it has Wi-Fi 6 and Bluetooth LE, you’ll be able to effortlessly provision a tool with an current residence automation community. Moreover, since Wi-Fi 6 assist comes from a Nordic nRF7002 IC, BLITZ communicates with 2.4 and 5 GHz Wi-Fi networks.

Conexio helps coding for the BLITZ by means of VS Code and Nordic’s nRF Join SDK. When the funding marketing campaign is full, Conexio plans to supply firmware examples and supply recordsdata. You’ll be able to already comply with the BLITZ firmware and BLITZ {hardware} repos, though they’re presently unpopulated.

Beforehand, we shared one other Conexio product referred to as the Conexio Stratus. That product was a bodily and electrically Feather-compatible growth board based mostly on the cellular-based Nordic nRF9160 system-in-package.

You’ll be able to subscribe to the Conexio BLITZ Crowd Provide pre-campaign for notifications when pre-orders turn out to be obtainable.

Latest news
Related news

LEAVE A REPLY

Please enter your comment!
Please enter your name here